On-Site Sewage Facilities (OSSF) – Installer II Practice Exam

These questions are part of the practice quiz. Start practicing

• What are the primary components of solids found in wastewater?
• An important part of the installation of an LPD system is?
• What type of documentation must an installer provide after completing an OSSF installation?
• What should be specified during the design phase to ensure optimal system functioning?
• What role do maintenance instructions play in the management of OSSFs?
• Which agency adopted the current OSSF Rules and made several revisions since?
• What is one key purpose of the septic tank?
• What is one result of using garbage disposals in sewage systems?
• In a two-compartment system, the first tank should contain how much of the required capacity?
• What is the primary function of a pump chamber in an OSSF?
• What type of soil is often deemed unsuitable for conventional OSSFs?
• Why is proper effluent absorption important for OSSF operation?
• What occurs during the process of anaerobic digestion in septic tanks?
• What is a potential health impact of high nitrate levels in drinking water?
• How much of the first tank’s capacity should a two-compartment system typically hold?
• What is the primary purpose of an On-Site Sewage Facility?
• Where should the stub out location be for the house sewer?
• What is the color of septic wastewater typically described as?
• Why is it crucial to monitor for ground surface seepage in OSSFs?
• What type of construction is required for the line from the house to the septic tank?
• What is the minimum slope required for the house sewer pipe per foot?
• What is a septic tank's function in an OSSF?
• What is the required amount of TCEQ approved continuing education courses for license renewal?
• How do high groundwater levels affect On-Site Sewage Facility installation?
• How should a newly installed OSSF be marked for visibility?
• What is a key feature of aerobic treatment plants?
• Why is testing soil percolation important?
• Which of the following OSSF licenses requires previous experience?
• What does BOD stand for in relation to wastewater treatment?
• What can excessive pressure loss lead to in a sprinkler system?
• The location of the treatment tank is usually determined by the slope of the land and which two features of the home?
• What is the minimum soil depth required above a drain field for effective treatment?
• Which principle does the leach field operate on?
• What is the minimum depth required for a standard absorptive drainfield?
• How can vegetation negatively impact an OSSF?
• What can be a consequence of failing to properly maintain an OSSF?
• Which of the following conditions signals a malfunctioning OSSF?
• What does BOD stand for in wastewater treatment?
• What is the purpose of requiring an affidavit to be filed with the county real property records for a surface application system?
• What is a major reason for the failure of wastewater systems?
• In what year did statewide regulation of OSSF begin?
• Which should NOT be allowed over an OSSF treatment unit or drainfield?
• In sprinkler systems, what term describes the resistance encountered while water flows through pipes?
• What are the minimum soil requirements for leaching chambers or gravelless pipe systems following a septic tank?
• Which of the following is a category under which penalties for OSSF violations can be imposed?
• What is an aerobic treatment unit?
• What system might be necessary in locations with shallow soil?
• What is the first step in the process to pre-qualify for an exam related to OSSF?
• In the context of an OSSF, what is typically assessed during a site evaluation?
• Why is surface application often selected over other OSSF disposal options?
• What soil types should be used for backfilling above the barrier and gravel?
• During which phase is information about property boundaries and soil conditions obtained?
• What is the most common type of media used in drainfields?
• Which groundwater contaminant from septic systems can lead to a specific condition in infants?
• When the minimum lot size cannot be met, who is responsible for designing an on-site system?
• What is effluent?
• An individual who holds a valid license from TCEQ to install or repair an OSSF is known as a?
• How can an installer ensure compliance with OSSF regulations during installation?
• What is the desired method of regulation for OSSF in Texas?
• In a well-designed sprinkler system, what type of control is essential?
• What does TSS stand for in wastewater treatment?
• Why is it important to keep drainage pathways clear around an OSSF?
• What material is commonly used for constructing septic tanks?
• What is a potential sign of a failing On-Site Sewage Facility (OSSF)?
• What is the maximum inlet pressure for sprinklers that should be maintained?
• What is the minimum lot size required for the installation of a septic tank system served by a public water supply?
• What does BOD stand for in the context of wastewater management?
• Which plumbing device is NOT considered water-saving?
• What two factors determine the size of a drainfield?
• What is the first step in reducing wastewater load from a household?
• Why might a homeowner experience backups in plumbing fixtures?
• When assessing a sprinkler system's design, what is most crucial to maintain?
• What is a common maintenance practice for an OSSF to ensure its longevity?
• In what scenario might a mound system be considered for OSSF?
• What activity should homeowners avoid to help reduce unnecessary water consumption?
• What is the minimum pressure requirement for distribution lines in a drip irrigation system?
• How far apart must cleanout access points be from each other when dealing with 90-degree bends?
• What materials are acceptable for constructing treatment and pump tanks?
• What is a common requirement for maintenance contracts in OSSF systems?
• A mound or soil substitution drainfield is often used?
• Which of the following impacts the efficiency of a sprinkler system?
• What can consistent ground surface seepage indicate in an OSSF?
• What may result from not maintaining the appropriate maximum inlet pressure in sprinklers?
• Septic tanks must have which design?
• What is a contributing factor to maintaining the design pressure in a sprinkler system?
• What measurement is critical to preventing water waste in sprinkler systems?
• What role does a drain field play in relation to the soil?
• Which of the following factors is crucial when evaluating the potential effects of an OSSF?
• What is meant by the term "saturated soils" in the context of OSSF?
• Which factor impacts the effectiveness of wastewater treatment in OSSFs?
• What is the primary consideration when selecting a location for an OSSF?
• What is the required minimum separation between drainfield excavations?
• What consideration should receive the greatest emphasis in selecting an OSSF disposal option?
• What type of treatment process do trickling filters and wetlands provide?
• OSSF surface application always requires:
• How is wastewater containing no dissolved oxygen characterized?
• Which state agency is responsible for regulating OSSF?
• Most OSSFs utilize soil to perform which functions concerning wastewater?
• What type of maintenance is essential for an aerobic treatment unit?
• Which type of OSSF relies on mechanical aeration for treatment?
• How often should a septic tank be pumped out?
• What does OSSF stand for?
• Why are setbacks important in OSSF installation?
• What microorganisms are responsible for breaking down waste in an aerobic treatment unit?
• The setback from a public water well for an aerobic plant is:
• What does the "Q" value represent in relation to sewage systems?
• What is the importance of providing as-built drawings after an OSSF installation?
• What materials often cause blockage in home plumbing systems?
• Explain what a D-Box is in OSSF systems.
• What is the significance of soil texture in OSSF design?
• What does the "drainage area" signify in OSSF terminology?
• What can poor performance of an OSSF lead to, in addition to ground surface seepage?
• What is the function of a leach field?
• To determine the minimum size of an aerobic treatment plant, which factor must be considered?
• Who is authorized to review permit applications, site evaluations, and conduct inspections of OSSFs?
• Which mechanism is NOT important in treating wastewater in soil treatment systems?
• What effect do high pH levels have on an OSSF?
• What is a float switch used for in an OSSF?
• What role does soil play in an OSSF?
• What is an expected outcome of a successful environmental impact assessment?
• Which factor is critical to ensuring effective performance in a sprinkler system?
• What are site evaluations used for in OSSF planning?
• What is the primary threat posed by malfunctioning On-Site Sewage Facilities (OSSF)?
• During the evaluation of land for an OSSF, which hazard must be specifically assessed?
• pH measures whether wastewater is what?
• What can result from improper marking of an OSSF installation?
• What must be indicated on plans submitted for OSSF installation?
• Which of the following should not be used as they significantly increase suspended solids in sewage systems?
• What is the typical size range of a residential septic tank?
• What are the most common chemical elements found in sewage?
• Which two tests are commonly used to measure the strength of sewage?
• What role does local regulation play in OSSF management?
• What is the role of fats and greases in the context of sewage composition?
• Which two factors are key considerations when evaluating a topography site?
• What action should be taken if signs of system failure are observed in an OSSF?
• What is one of the primary contaminants of concern in OSSF systems?
• In the site evaluation phase, what kind of information is critical for assessing the suitability of land?
• What does "hydraulic loading rate" refer to in an OSSF?
• Which of the following best describes the function of an OSSF?
• On what basis are OSSF systems normally sized?
• What type of fitting should be used for sewer connections?
• What should be taken into account when determining the type of OSSF to install?
• What must OSSF installers be aware of regarding local regulations?
• What is the minimum inside diameter required for the pipe from the house to the septic tank?
• Which of the following is a habit that can help conserve water during personal hygiene practices?
• Which two components are primary in a conventional septic system?
• What can snow or heavy rain cause regarding OSSFs?
• Drip irrigation systems are most sensitive to which type of contaminant?
• What does DO refer to in water quality management?
• Which of the following diseases might be transmitted by inadequately treated sewage?
• Through what methods can hazards be taken into the body?
• Which of the following options is NOT a benefit of reducing wastewater loads?
• Which component is essential to include in maintenance instructions for an OSSF?
• Which method can be used to evaluate an aerobic treatment plant for excessive solids?
• On a west Texas site with 16 in of Class Ia soil over fractured rock, suitable OSSF systems include:
• What is the purpose of a backup alarm in an OSSF?
• When designing a sprinkler distribution system, what key consideration should be made to avoid excessive pressure loss?
• Which systems routinely require a pump tank?
• What is often required for a complete application for an OSSF installer exam?
• What term describes a microorganism that causes disease?
• How is excessive pressure loss in distribution lines typically addressed?
• What does 'soil texture class' refer to in the context of OSSF rules?
• What is a common myth about septic tank maintenance?
• What must be provided between the building and the septic tank for maintenance?
• What is the minimum lot size required for a septic tank system served by individual wells?
• Why are wastewater disposal and OSSF systems regulated?
• Which component in a surface application system is crucial for proper operation?
• Which regulatory authority oversees the installation of OSSFs?
• What is the primary purpose of an environmental impact assessment in the context of On-Site Sewage Facilities (OSSFs)?
• Which practice should NOT be adopted to conserve water?
• How can excessive water usage impact an OSSF?
• What aspect of soil is crucial for the successful installation of a septic system?
• Which of the following is true of an intermittent sand filter?
• Which of the following statements is true regarding the factors that influence septic system performance?
• What is a common misconception about the use of garbage disposals in reducing waste?
• Which title is given to an individual who conducts soil evaluations and site surveys?
• What is required for a proprietary aerobic treatment plant to be suitable for surface application disposal?
• What is the role of a distribution box in a septic system?
• List hazards that require the use of PPE.
• When systems fail in urban or suburban areas, what major risk do they pose?
• What may indicate that an OSSF needs immediate attention?
• Which texture class of soil is classified as sandy according to Texas OSSF rules?
• Required samples for testing from a surface application system are collected from?
• What should installers educate homeowners about regarding their OSSF?
• What habit can homeowners adopt to save water when doing laundry?
• Which condition may necessitate the use of alternative technologies in OSSF design?
• One of the essential functions of an OSSF is to ensure that:
• Which of the following is a criteria to determine if a subsurface OSSF system is functioning properly?
• How does climate affect the design and operation of an OSSF?
• What is the main function of a septic drain field within an OSSF?
• Which OSSF disposal systems are routinely required to have maintenance contracts?
• What type of barrier must be placed on top of the porous media before backfilling?
• What should be avoided when considering the installation of an OSSF?
• Which soil texture class is considered the most permeable?
• Which of the following is required to determine the size of spray area for an OSSF spray irrigation system?
• What is the purpose of "effluent filters" in a septic tank?
• What is a mound system?
• What criteria assess the suitability of a site for an OSSF?
• What is a common reason for failures in soil absorption systems?
• What is a major consequence of neglecting the maintenance of aerobic treatment units?
• What minimal intervention can allow a malfunctioning OSSF system to operate properly?
• Name three types of OSSFs commonly used?
• What are the benefits of using gravity flow in an OSSF?
• What is a likely cause of a "rotten egg" odor from an aerobic treatment plant?
• What is the primary purpose of a soil treatment area in an OSSF?
• What is the maximum length of distribution lines from the manifold to avoid excessive pressure loss?
• Why should rainwater runoff be controlled around an OSSF?
• Which of the following symptoms are associated with Typhoid fever?
• In compliance with design specifications, what feature should sprinklers exhibit?
• New OSSF licenses are issued for a term of how many years?
• A legal maintenance company for a surface application OSSF system using proprietary aerobic plant must have an employee who is which of the following?
• A drip irrigation system must?
• Individuals working as DR or in any capacity for an OSSF cannot work as which of the following?
• What does mottled soil, especially with bright and gray variations, typically indicate?
• In evaluating a lot for septic tank system design, which of the following must be considered?